Register a project - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

Language
English
Product
Intergraph Smart Isometrics
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
7.0(2019)
Spoolgen Version
9.0(2019)

  • You must first configure the software to work in an integrated environment by installing Intergraph SmartPlant (Schema Component and the SmartPlant Client), which are both delivered with SmartPlant Foundation, on your Smart Isometrics workstation. For more information, see the Integration setup documentation, delivered on the SmartPlant Foundation product DVD.

  • If you did not install I-Configure when you initially installed Smart Isometrics, you must do so using the Custom setup. For more information, see the Smart Isometrics installation documentation.

A project must be registered before you can connect to the integrated environment to publish materials data. To register an isometric project with a SmartPlant Foundation plant, you use the SmartPlant Registration Wizard in I-Configure to define integration-specific project defaults.

  1. Click Start > All Programs > Intergraph Smart Isometrics > I-Configure.

  2. In the Project Panel, select the name of the project to register.

  3. Click Edit > Project Defaults.

  4. Scroll down to SmartPlant Foundation URL in the Application list, and click Project Defaults Arrow in the Value cell. Alternatively, click Project Defaults Arrow in the Value cell for SmartPlant Foundation Plant or SmartPlant Foundation Signature to open the SmartPlant Foundation Wizard.

    The SmartPlant Registration Wizard opens.

  5. On the SmartPlant Foundation URL page, type the node name and virtual directory of the SmartPlant Foundation database with which to register. Use the following format:

    http://SPFServer/VirtualDirectory

  6. On the SmartPlant Foundation Plant page, select the plant in the Plant name list with which you want to register, and then click Finish.

  7. Click OK.

    The three SmartPlant Integration project defaults are updated with the defined values. An example is shown below.

    SP Integration

  8. Click File > Exit to close I-Configure.

In an integrated environment, the term plant is synonymous with the top level of the PBS hierarchy.