Define measurements with two points - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

PPMProduct
Intergraph Smart Isometrics
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_IConfig
6.0(2016)
Version_ISOGEN
13.0(2016)
Version_SPIso
7.0(2019)
Version_SPSplgn
9.0(2019)
  1. If it is not already open, click File > Open to locate and open the referenced piping sketch.

  2. Click Point Measure on the Point Cloud toolbar.

  3. Select two points on the point cloud.

    The software records the coordinates and the distance between them in the Point Cloud Measurements window.

  4. Open the referenced piping sketch, and transfer the measurements as needed to fully define the pipeline.

    Transfer measurement points

    Transfer a length to a section of pipe

    Transfer a length to a dimension