Toggle Single Limit Box/Slice - CloudWorx for Intergraph Smart 3D - Help

CloudWorx for Intergraph Smart 3D Help

PPMProduct
CloudWorx for Intergraph Smart 3D
PPMCategory_custom
Help
Version_S3D
11.x(2016)
Version_SPR
13.x(2018)

Toggles between advanced clipping mode and the pre-4.2 clipping mode which uses single limit box and slice. With the single limit box or slice scheme, defining a limit box overrides any existing limit box. Similarly, defining a slice or section view overrides the existing slice or section view clipping. Fence clippings are not affected by this change. After running this command, you are prompted for the current clipping scheme.

You can also switch the clipping scheme using the CloudWorx menu in Clipping Manager. The menu item is selected if this clipping scheme is used.

Turning on Single LimitBox/Slice mode only affects commands to define new limit box, slice, or section view. It does not affect fence command. Also, when a new limit box, slice, or section view is defined, it only overrides a specially named clipping, and suppresses all other clippings of the same type. Using Clipping Manager, you can still turn on other clippings at your discretion. None of the tasks in Clipping Manager dialog is affected by this mode.