There was no contact between the edge reinforcement and the reinforced edge port - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: There was no contact between the edge reinforcement and the reinforced edge port. For example, the edge reinforcement and/or the reinforced edge port might need to be updated.

Recovery:

  1. Verify that the edge reinforcement and the reinforced system are correct. Make any necessary corrections.

  2. Verify that the edge port is correct.

  3. Update the edge reinforcement and the reinforced system if they are on the To Do List.

  4. If the problem persists, report steps taken to your support group.