Brace is not point-on related to a split connection or an end-joint of a member. Change connection to unsupported and then re-select the intersection. - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: The brace must be related (using a point-on relationship) to a split connection or an end joint of a member. This is an internal software failure where the relationships for the vertical corner brace were not established correctly.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the brace by selecting the frame connection of the supporting beam.