Split connection is using the same member for both the member to split and to define the split location. Delete the connection and replace. - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: Placing a split connection will not allow the same member as the object to split itself. Therefore, the only time that this error could occur is during a copy/paste operation. During the paste of a split connection, the selection of the member to be split and the selection of the splitter should not be the same object.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Split Connections.

  4. Select the split connection in error.

  5. Click Delete ICON Remove.

  6. Click Place Split and place the split connection again.