Vertical corner brace frame connection is using the same member system for both supporting members. The two supporting members must be different members.... - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: An attempt is being made to provide the same member as the first and second supporting member when these two must be unique members, resulting in the improper placement of the corner brace. This error is an internal software failure where the calling software did not properly call the Frame Connection with its required inputs.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the brace by selecting the frame connection of the supporting beam.