The bottom slope of the Trench Feature does not meet minimum bottom slope criteria of the selected Trench Type. Please check the inputs - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: The trench run does not meet the minimum bottom slope criteria as specified in the catalog.

Recovery:

  1. In the Workspace Explorer, select the trench run that is in error.

  2. Click Properties .

    The Trench Run Properties dialog box displays.

  3. On the General tab, select Dimensions in the Category box.

  4. Change the Elevation or Slope values.

  5. Click OK.

  6. Click Finish on the command ribbon.

-OR-

  1. In the Workspace Explorer, select the trench run that is in error.

  2. Click Path .

  3. Modify the Sketch 3D path so that it meets the bottom slope criteria as specified in the catalog.

  4. Click Finish on the path ribbon, and then click Finish on the command ribbon.