The seam or knuckle cannot split the plate system - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Object Type in the To Do List: Seam or split knuckle on plates.

Meaning: The seam or knuckle cannot split the plate system. The methods used to place the seam might create seam geometry out of the plate surface. Duplicate seams might exist at the same location. For tubular plates, this error can display when the tubular plate is split by one axial seam.

Recovery:

  1. Check for duplicate seams or knuckles.

  2. Verify that the seam is created on the plate surface.

  3. Recompute the seam, and split the plate system again.