Error Messages: O - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Object Variable or With block variable not set.

One or more graphic files (.zvf) are missing their corresponding attribute data files (.drv). This situation can also occur if an incorrect Reference 3D Model Type is specified. Continuing further would result in objects in such graphic files being deemed as Generic Reference 3D Objects with no data.

Select Yes to continue attaching the Reference 3D Model.

  • Meaning - When new R3D model attached: Referencing a file such as PDMS or Other R3D Model type and mistakenly left default S3D type

  • Recovery - Change to the correct type.

  • Meaning - Incomplete publish

  • Recovery - Republish

  • Meaning - Files corrupted or missing during transfer

  • Recovery - Resend files

  • Meaning - When new R3D model attached or updated:

  • Meaning - No data available.

  • Recovery - You can continue.

One or more graphic files (.zvf) are missing their corresponding attribute data files (.xml). This situation can also occur if an incorrect Reference 3D Model Type is specified.  Continuing further would result in objects in such graphic files being deemed as Generic Reference 3D Objects with no data.

Select Yes if you wish to continue attaching the Reference 3D Model.

  • Meaning - When new R3D model attached: Referencing a file such as PDMS or Other R3D Model type and mistakenly left default S3D type

  • Recovery - Change to the correct type.

  • Meaning - Incomplete publish

  • Recovery - Republish

  • Meaning - Files corrupted or missing during transfer

  • Recovery - Resend files

  • Meaning - When new R3D model attached or updated:

  • Meaning - No data available.

  • Recovery - You can continue.

One or more of the selected documents do not satisfy the publish criteria. Please see: \temp\Drawings.log.

  • Meaning: One or more of the documents you selected to publish is not up-to-date or does not have the required Discipline property set. A list of the documents that do not meet the criteria is logged to the Drawings.log file in your temp folder.

  • Recovery: Review the list of documents in the Drawings.log file and make sure they are up-to-date and the Discipline property is set.

One or more recipient addresses are invalid. Make sure the addresses for the RecipAddress property are valid.

  • Meaning: The recipient addresses that you entered while using the File > Send command are not correct.

  • Recovery: Run the command again, and enter correct addresses for the recipients.

Only one item can be selected.

  • Meaning: More than one drawing view is selected, and the current operation requires a single drawing view.

  • Recovery: Select a single drawing view and try the operation again.

Operation is not allowed when the object is closed.

  • Meaning: This error occurs when there is a problem in the Microsoft® ActiveX Data objects (or ADODB) library. The software may have attempted to perform an operation on an object from the library, but the object is in a closed state. For example, the operation could be on a Connection or a RecordSet object. If the error is caused by the ADOBD.Connection object, it could mean that the database is offline, paused, stopped, or unreachable because of a network issue.

  • Recovery: Check with your database administrator for database issues and your system administration to see if the problem could be a network issue. Contact Intergraph Support if the problem persists and is not database or network related.