Meaning: A trench run was created or modified in such a way that a trench turn feature's previous and next straight features overlap.
Recovery:
-
In the Workspace Explorer, select the trench turn feature that is in error.
-
Click Properties .
The Trench Turn Feature Properties dialog box displays.
-
On the General tab, select Dimensions in the Category box.
-
Change the projection values so that the inside lengths of the previous and next straight runs do not overlap.
-
Click OK.
-
Click Finish on the command ribbon.
-OR-
-
In the Workspace Explorer, select the trench run that is in error.
-
Click Path .
-
Increase the lengths of the Sketch 3D segments so that the previous and next straight runs do not overlap.
-
Click Finish on the path ribbon, and then click Finish on the command ribbon.