Supported and supporting members are almost parallel. - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: A cope feature was applied to two parallel members so this error may occur as a result of placement of the assembly connection. More than likely the two members were not originally parallel when the cope feature was applied, but one of the members was modified such that they now are parallel.

Recovery: Review the model closely because an applied fitted assembly connection between two parallel members does not make sense. It is likely the assembly connection needs to be changed to a different type of assembly connection or that one of the members was placed incorrectly and needs to be moved. The recommended recovery would be to delete the connection and execute the place assembly connection command applying a more appropriate connection.