Failed to place the cutout - Intergraph Smart 3D - Troubleshooting

Intergraph Smart 3D Troubleshooting Reference

Language
English
Product
Intergraph Smart 3D
Subproduct
Troubleshooting
Search by Category
Troubleshooting
Smart 3D Version
11 (2016)

Meaning: Failed to place the cutout on the plate. The "cutting tool" was created but when it was applied to actually perform the cut on the plate surface, failure occurred. The opening is invalid.

Recovery:

  1. Try sketching the opening again. The opening must be a closed wire and it must not intersect the plate within its boundaries.

  2. If the problem persists, report steps taken to your support group along with the sketch being used.