Correlate Existing Equipment for Use in an Integrated Environment - Intergraph Smart 3D - Help

Intergraph Smart 3D Equipment and Furnishings

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)

If the nozzles exist on the equipment before you correlate, then the software attempts to correlate the nozzles automatically. Otherwise, you must correlate existing equipment in two processes. First, correlate the body. Then, correlate the nozzles in a separate process.

Correlate the Body

  1. Select Correlate with Design Basis.

  2. Select the main equipment body.

  3. Select the equipment on the P&ID.

Correlate the Nozzles

  1. Select Correlate with Design Basis.

  2. Select a nozzle on the equipment.

  3. Select the corresponding nozzle on the P&ID.

If the nozzle names in the 3D model and the names identified in the P&ID match, then the nozzles correlate to the correct state. If there are any discrepancies, you can view them using the SmartPlant > Compare Design Basis command.