Gap Tolerance (gapTolerance) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

Determines the maximum distance that a matchline label allows between a drawing volume and a neighboring volume. If the neighboring volume falls outside this distance, then a drawing limit label replaces the matchline label. The software eliminates candidates that are too far away from the drawing view volume from matchline consideration.

1 - Drawing volumes (subject volume is blue)
2 - Gap tolerance
3 - Adjacent edge overlap percentage

1 - Drawing volumes (subject volume is blue)
2 - Gap tolerance
3 - Adjacent edge overlap percentage

Type a distance in the Gap Tolerance box on the Matchline Rule Manager. Alternately, enclose the equivalent decimal value within the following .xml tags:

<gapTolerance>0.001</gapTolerance>

See Also

Matchline (DrawingMatchlinePG)
Adjacent Edge Overlap Percentage (adjacentOverlap)