Default (DrawingGeometricAnalyzer) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

Chains dimensions together within a view based on the proximity of the objects intended for dimensioning.

1 - Dimension
2 - Equipment objects
3 - View

Usage in Label or Dimension Template XML

<geometricAnalyzerSettings>
<gaModule>DrawingGeometricAnalyzer</gaModule>
</geometricAnalyzerSettings>

Customization

keepTopOrBottomDup

Allows you to place a label on either the topmost or bottommost object in a group of objects aligned at identical X positions along a vertical axis.

keepLeftOrRightDup

Allows you to place a label on either the leftmost or rightmost object in a group of objects aligned at identical Y positions along a horizontal axis.

maxDimOffset

Determines the maximum linear paper space distance between consecutive witness lines in a linear distance dimension group.

maxWitnessLength

Controls the length of witness lines so that you can determine how far across the drawing the line is drawn. Points that fall outside the maximum witness length are eliminated from consideration.

overall

Places an additional dimension over each dimension chain cluster identified by the rule.

placeLines

Controls line placement through the coordinate label points along aligned objects. Use this property to include a single label in the drawing that specifies a common elevation for aligned objects.

keepEqualDistanceDup

Eliminates points from dimensioning consideration when multiple pairs of points are equal distances apart (for example, when multiple objects are placed in a grid pattern). If you select the Keep Equal Distance Duplicates check box, multiple dimensions with identical values might appear on the drawing.