Occurrence Tab - Intergraph Smart 3D - Help

Intergraph Smart 3D HVAC

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Displays instance-specific information about the object. Available options depend upon the Category selected. For more information about occurrences defined in the reference data, see the HVAC Reference Data Guide available from Help > Printable Guides.

Preview button

Displays a preview of the object.

Standard

Name

Displays the occurrence name of the object.

Modeled Length

Displays the length of the object in the model. This property is not displayed for all occurrences.

Reporting Requirements

Displays the reporting requirement for the selected object. To add, edit, or remove values that are available for selection, edit the Reporting Type select list in the Catalog task.

Reporting Type

Displays the type of reporting. To add, edit, or remove values that are available for selection, edit the Reporting Type select list in the Catalog task.

Weight and CG

Displays the center-of-gravity and the weight of the selected object. The software includes the insulation weight in the calculated weight. If you key-in the weight yourself, you must include the insulation weight in the weight value that you type. The center-of-gravity locations are displayed in global system coordinates along the X-, Y-, and Z-axes.

Dry Weight

Displays the dry weight of the object.

Wet Weight

Displays the wet weight of the object.

Dry CG X

Displays the X-axis location of the dry center-of- gravity.

Dry CG Y

Displays the Y-axis location of the dry center-of- gravity.

Dry CG Z

Displays the Z-axis location of the dry center-of- gravity.

Wet CG X

Displays the X-axis location of the wet center-of- gravity.

Wet CG Y

Displays the Y-axis location of the wet center-of- gravity.

Wet CG Z

Displays the Z-axis location of the wet center-of- gravity.

Dry WCG Origin

Specifies if the software calculates the dry weight center-of-gravity origin location or if you specify the origin location yourself. Options include Defined or Computed. To key in values, you must select Defined.

Wet WCG Origin

Specifies if the software calculates the dry weight center-of-gravity origin location or if you specify the origin location yourself. Options include Defined or Computed. To key in values, you must select Defined.

Fabrication and Construction

Fabrication Requirement

Select the fabrication requirement for the selected object. If you want to add, edit, or remove values that are available for selection, edit the Fabrication Type select list in the Catalog task.

Fabrication Type

Select the fabrication type for the selected object. If you want to add, edit, or remove values that are available for selection, edit the Fabrication Type select list in the Catalog task.

Construction Requirement

Select the construction requirement for the selected object. If you want to add, edit, or remove values that are available for selection, edit the Construction Type select list in the Catalog task.

Construction Type

Select the construction type for the selected object. If you want to add, edit, or remove values that are available for selection, edit the Construction Type select list in the Catalog task.

See Also

Duct Part Properties Dialog Box

Duct Component Properties Dialog Box