Insert Inline Component Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D HVAC

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Specifies the options for placing an In-line component in the design.

Properties

Opens the Insert Component Settings dialog box. You can use this dialog box to define properties of the component after you select a feature and specify a part. For more information, see Insert Component Properties Dialog Box.

Select Straight or End Feature

Select the duct, duct end, component port, or nozzle for the component that you are placing.

Part

Defines the component to insert from the catalog. The list includes the last ten names of component parts that you have placed. The More option opens the Select Part dialog box for browsing the catalog for the correct part.

Enter Insertion Point

Positions the component that you are placing along the duct that you selected. You can use Tools > PinPoint and Tools > Point Along to define the precise location of the component on the duct run.

Finish

Places the component in the duct run.

Run

Defines the name of the duct run with the component that you placed. The selection list includes:

  • Duct runs assigned to the parent system of the end feature or straight feature that you selected

  • More to allow you to browse the catalog for a different duct run

  • New Duct Run to open the New Duct Run dialog box

  • New/Continue Run to use the duct run of the end feature or straight feature that you selected

Name

Defines the occurrence name of the component that you are placing. The name can have a maximum of 64 characters.

Flip

Changes the component port that is connected to the selected port.

Reference position

Defines the insertion point of the component by a particular port or by its origin.

Rotate

Rotates the component about the duct interactively around the feature axis.

Angle

Defines the angle for rotating the component about the duct.