INGR_ATEXT_SPECIFICATIONS - PDS - Reference

Plant Design System (PDS) ISOGEN

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Reference
Version_S3D
12.x(2018)

This table is used to modify the values of text strings that PD_ISO puts on drawings. The format of a table entry is:

ATEXT number, 'old text', 'new text'

Where:

ATEXT number

is 1-15

'old text'

is the text string to be substituted.

'new text'

is the new text string to be applied to the Atext number.

The 'old text' value is used if the 'new text' value is left blank or if the INGR_ATEXT_SPECIFICATION record is omitted from the Options file. No value is used if the string 'blank' is assigned as the value of 'new text'.

1,

’NOT FOUND’,

"

!Used based on Intergraph option 6 and ATEXT -209

2,

’BOLT LENGTH’,

"

!Used based on Intergraph option 58

3,

'NUTS PER BOLT',

"

!Used based on Intergraph option 52

4,

’CHAIN_’,

"

!Used based on Intergraph option 33, 56

5,

’FSTAND_’,

"

!Used based on Intergraph option 33

6,

’XSTEM_’,

"

!Used based on Intergraph option 33

7,

’HOR’,

"

!Horizontal - Used for an operator in a 2plane ske

8,

’VOR’,

"

!Vertical - Used for an operator in a 2plane ske

9,

’DEG’,

"

!Degree - Used for an operator in a 2plane ske

10,

’E’,

"

!Used with skewed operator orientation notes

11,

’N’,

"

!Used with skewed operator orientation notes

12,

’U’,

"

!Used with skewed operator orientation notes

13,

’W’,

"

!Used with skewed operator orientation notes

14,

’S’,

"

!Used with skewed operator orientation notes

15,

’D’,

"

!Used with skewed operator orientation notes

16,

’****’

"

!Used based on Intergraph option 26 Position A set to 2

17,

’SCHEDULE’

"

!Used based on Intergraph option 10 set to 1’’