Weld Box Summary - PDS - Reference

Plant Design System (PDS) ISOGEN

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Reference
Version_S3D
12.x(2018)

Standard Weld Summary Box

Weld Box header details (line 1):

-412

WELD

SHOP

WELD

WELDER

VISUAL

NDT

HARD

S.R

FAB.QA

Continuation of Weld Box header details. (line 2):

-413

NO

/FLD

PROC

ID

ACCEPT

NO

NO

ACCEPT

The first column of this Weld Summary box is used for the software-generated weld number and optional prefix. The second column is for Weld category and contains the Shop / Field / Offshore indicators. This must be taken into account when making any changes to either of these two ATexts.

-414

S

Weld category identification - Shop.

-415

F

Weld category identification - Field.

-416

O

Weld category identification - Offshore.

One of the above characters is plotted in the Weld Category column (column 2), depending upon the type of weld.

User-Defined Weld Summary Box

-417

BW

Used for weld type identifier butt weld.

-418

SW

Used for weld type identifier socket weld.

-419

MW

Used for weld type identifier miter weld.

-420

LUG

Used for weld type identifier LUGG.

-421

SOF

Used for weld type identifier slip-on flange.

-422

SOB

Used for weld type identifier set-on branch.

-423

LET

Used for weld type identifier LET, such as olet, latrolet, half coupling..

-424

SLW

Used to indicate the weld type for seal welds in welding lists and reports.

-438

SEAM

Weld type identifier for a seam weld.

-504

(Normally blank)

Can be user-defined and used to identify field fit welds only when the weld category attribute is output.

-507

RPD

Used for weld type identifier for a basic reinforcing pad weld, when one extra weld number is requested.

-508

LF

Used for weld type identifier for a reinforcing pad to main pipeline weld, when two extra weld numbers are requested. (Used together with AText -509).

-509

L4

Used for weld type identifier for a reinforcing pad to branch weld, when two extra weld numbers are requested. (Used together with AText -508).

-510

(Normally blank)

If set, it is used as the delimiter between the two material list Identifiers in the Location column of the operations box.

-511

PAD

Used as a part identifier in the Location column of the operations box in cases where a reinforcement pad has not been included on the material list.

-513

TW

Weld type identifier for a tack weld.

-516

TRN

Weld type identifier for a trunnion weld (The weld that connects the trunnion to the main pipeline).

-517

5

Used for weld action identification for a manual weld on the operations list.

-518

1

Used for weld action identification for an automatic weld on the operations list.

-519

EB

Used for pulled bend identification on the operations list.

-520

RL

Used for random length identification on the operations list.

-521

FW.

Used for weld type identifier for a fillet weld. (The basic weld used for connecting pipe supports to the pipeline).

-522

(Normally blank)

If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for a reinforced tee or cross.

-523

(Normally blank)

If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for an angled (not 90°) reinforced tee or cross.

-524

(Normally blank)

If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for an angled (not 90°) set-on tee or cross.

-525

(Normally blank)

If set, it is used for the weld type identifier for any olet type component with an SKEY of HCSC or HCSW.

-526

(Normally blank)

If set, it is used for the weld type identifier for a reinforcement pad to main pipeline weld on an angled branch when two extra weld numbers are requested. (Used together with AText -527).

-527

(Normally blank)

If set, it is used for the weld type identifier for a reinforcement pad to branch weld on an angled branch - when two extra weld numbers are requested. (Used together with AText -526).

-528

(Normally blank)

If set, it is used for the weld type identifier for a trunnion to elbow / bend connection.

-529

(Normally blank)

If set, it is used for the weld type identifier for a 90° non-reinforced trunnion to main pipeline weld.

-530

(Normally blank)

If set, it is used for the weld type identifier for an angled non-reinforced trunnion to main pipeline weld.

-531

(Normally blank)

If set, it is used for the weld type identifier for a 90° reinforced trunnion to main pipeline weld.

-532

(Normally blank)

If set, it is used for the weld type identifier for an angled reinforced trunnion to main pipeline weld.