SPOOLGEN (FFISYS) Screen Display - PDS - Reference

Plant Design System (PDS) ISOGEN

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Reference
Version_S3D
12.x(2018)

The following -800 series ATexts are used in SPOOLGEN probing and the FFISYS.

-800 series ATexts are applicable only for SPOOLGEN 4 and earlier versions of the software. They are not used for SmartPlant Spoolgen.

-800

BEND

Identification of BEND when probing.

-801

ELBOW

Identification of ELBOW when probing.

-802

OLET

Identification of OLET when probing.

-803

TEE

Identification of TEE when probing.

-804

CROSS

Identification of CROSS when probing.

-805

REDUCER

Identification of REDUCER when probing.

-806

TEE REDUCER

Identification of TEE REDUCER when probing.

-807

REDUCING FLANGE

Identification of REDUCING FLANGE when probing.

-808

TEE BEND/ELBOW

Identification of TEE BEND/ELBOW when probing.

-809

ANGLE VALVE

Identification of ANGLE VALVE when probing.

-810

3 WAY VALVE

Identification of 3 WAY VALVE when probing.

-811

4 WAY VALVE

Identification of 4 WAY VALVE when probing.

-812

INSTRUMENT

Identification of INSTRUMENT when probing.

-813

MISC COMPONENT

Identification of MISC COMPONENT when probing.

-814

PIPE (TUBE)

Identification of PIPE (TUBE) when probing.

-815

FIXED PIPE

Identification of FIXED PIPE when probing.

-816

PIPE BLOCK

Identification of PIPE BLOCK when probing.

-817

FLANGE

Identification of FLANGE when probing.

-818

LJSE FLANGE

Identification of LJSE FLANGE when probing.

-819

BLIND FLANGE

Identification of BLIND FLANGE when probing.

-820

CONNECTOR

Identification of CONNECTOR when probing.

-821

BACKING NUT

Identification of BACKING NUT when probing.

-822

CLAMP

Identification of CLAMP when probing.

-823

MISC HYGENIC COMPONENT

Identification of MISC HYGENIC COMPONENT when probing.

-824

CAP

Identification of CAP when probing.

-825

COUPLING

Identification of COUPLING when probing.

-826

UNION

Identification of UNION when probing.

-827

VALVE

Identification of VALVE when probing.

-828

TRAP

Identification of TRAP when probing.

-829

VENT

Identification of VENT when probing.

-830

FILTER

Identification of FILTER when probing.

-831

SUPPORT

Identification of SUPPORT when probing.

-832

INSTRUMENT TEE

Identification of INSTRUMENT TEE when probing.

-833

WELD

Identification of WELD when Probing.

-834

NONE

Indication that NO component was located successfully when probing.

-835

(Not Used)

Unused AText

-836

(Not Used)

Unused AText.

-837

(Not Used)

Unused AText.

-838

(Not Used)

Unused AText.

-839

(Not Used)

Unused AText.

-840

Changed to Bend

`Probing Action' message - Elbow changed to bend.

-841

Flange set to Loose

`Probing Action' message - Flange set to loose.

-842

Detail Sketch ?

`Probing Action' message - Detail Sketch added.

-843

Support changed to Fabrication

`Probing Action' message - Support changed to Fabrication.

-844

Support changed to Erection

`Probing Action' message - Support changed to Erection.

-845

Support changed to Offshore

`Probing Action' message - Support changed to Offshore.

-846

Tack Weld

`Probing Action' message - Tack Weld added.

-847

Support(s) added

`Probing Action' message - Support Welds added.

-848

Automatic Weld

`Probing Action' message - Automatic Weld added.

-849

Shop Test

`Probing Action' message - Shop Test Weld added.

-850

REDUCING-CONCENTRIC

Flange type REDUCING-CONCENTRIC selected when probing.

-851

REDUCING ECCENTRIC

Flange type REDUCING-ECCENTRIC selected when probing.

-852

STUB/BACKING PAIR

Flange type STUB/BACKING PAIR selected when probing.

-853

SCREWED

Flange type SCREWED selected when probing.

-854

SLIP-ON J TYPE

Flange type SLIP-ON J TYPE selected when probing.

-855

SLIP-ON

Flange type SLIP-ON selected when probing.

-856

SOCKET-WELD

Flange type SOCKET-WELD selected when probing.

-857

WELD-NECK

Flange type WELD-NECK selected when probing.

-858

SLIP-ON ORIFICE

Flange type SLIP-ON ORIFICE selected when probing.

-859

WELD-NECK ORIFICE

Flange type WELD-NECK ORIFICE selected when probing.

-860

LAP-JOINT RING

Flange type LAP-JOINT RING selected when probing.

-861

LAP-JOINT STUB END

Flange type LAP-JOINT STUB END selected when probing.

-862

UNKNOWN

Flange type UNKNOWN selected when probing.

-863

Material added

`Probing Action' message - Indication of additional materials added to pipeline.

-864

General Information Note - ?

`Probing Action' message - General information note added.

-865

Specific Information Note - ?

`Probing Action' message - Specific information note added.

-866

Weld deleted

`Probing Action' message - Weld deleted.

-867

Support Weld(s) deleted

`Probing Action' message - Support welds deleted.

-868

Spool Name deleted

`Probing Action' message - Spool same deleted.

-869

Flow Arrow deleted

`Probing Action' message - Flow arrow deleted.

-870

Message deleted

`Probing Action' message - Message deleted.

-871

Detail Sketch deleted

`Probing Action' message - Detail Sketch deleted.

-872

Information Note deleted

`Probing Action' message - Information Note deleted.

-873

Additional Material deleted

`Probing Action' message - Additional material deleted.

-874

Loose Flange un-set

`Probing Action' message - Loose flange un-set.

-875

Location point added

`Probing Action' message - Location point added.

-876

Location point deleted

`Probing Action' message - Location point deleted.

-877

FLOOR/WALL PENETRATION

`Probing Action' message - Identification of FLOOR/WALL PENETRATION when probing.

-878

FLOW ARROW

`Probing Action' message - Identification of FLOW ARROW when probing.

-879

INSULATION SYMBOL

`Probing Action' message - Identification of INSULATION SYMBOL when probing.

-880

MESSAGE

`Probing Action' message - Identification of MESSAGE when probing.

-881

Drawing Identifier deleted

`Probing Action' message - Identification of Drawing Identifier deleted.

-882

Default Start

`Probing Action' message - Identification of Default Start positioned.

-883

Pipeline Start

In Probing - Indication of default pipeline start point.

-884

Default Bypass Closure

In Probing - Indication of default bypass closure point.

-886

Bypass Closure

`Probing Action' message - Redefined bypass closure point.

-887

Pipe Support added

`Probing Action' message - Pipe support added.

-888

Pipe Support deleted

`Probing Action' message - Pipe support deleted.

-889

Properties Changed

`Probing Action' message - Category change for gaskets and bolts.

-890

Coupling Added

`Probing Action' message - Label showing where a coupling has been added.

-891

Coupling Deleted

`Probing Action' message - Label showing where an existing coupling has been removed.

-892

Pipe Support Changed

`Probing Action' message - Label showing where an existing pipe support has been changed.