Copy a grid plane - Intergraph Smart 3D - Help

Intergraph Smart 3D Grids

Intergraph Smart 3D
  1. Click Select on the vertical toolbar.

  2. Select Grid Plane in the Locate Filter box.

  3. Select the grid plane to copy.

  4. Click Edit > Copy.

  5. Click Edit > Paste.

  6. In the Paste Special dialog box, select the coordinate system to which to copy the grid plane.

  7. Click OK on the Paste Special dialog box.

  • The coordinate system that you are copying to cannot have an existing grid plane at that same relative location.

  • The nesting level must be maintained. For example, if you are copying a secondary grid plane, you must paste it between two primary grid planes in the new coordinate system.