Place a slab by selecting objects and drawing 3-D boundaries - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

Intergraph Smart 3D
10.1 (2014 R1)
  1. Click Place Slab on the vertical toolbar.

  2. Define a plane for the slab.

    Define Plane as Coincident
    Define Plane using Offset from Plane
    Define Plane using Angle to Plane
    Define Plane using Vector and Point
    Define Plane using Three Points

  3. Click Accept .

  4. Click Select Boundaries .

  5. Select objects in the model to define part of the slab boundaries. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries.

  6. Click Sketch 3D .

  7. Sketching a path that defines the remaining part of the slab boundary.

  8. Define a path

  9. Click Finish.

  10. Click Accept .

  11. Set the slab system, type, priority, face position, and other properties.

  12. Click Finish.