The RectTee sheet in the HVAC.xls workbook defines the rectangular tees that you want in the Catalog.
PartNumber
Type the part number for the round tee. An example is RectTee1.
PartDescription
Type a description for the object.
FaceWidth
Type the face width of the damper for the object.
FaceDepth
Type the face depth of the damper for the object.
ComponentType
Type the component type for the object.
SymbolDefinition
Type the symbol definition for the object.
Width
Type the width of the duct.
Depth
Type the depth of the duct
BWidth
Type the width of the bend.
BDepth
Type the depth of the bend.
HLength
Type the length for the round tee.
BLength
Type the length of the bend.
PlaneOfBranch
Type the angle of the bend.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Nozzle(i):CrossSection
Type the related CrossSection object for the port in the particular nozzle.
Nozzle(i):EndPrep
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Nozzle(i):Thickness
Type the thickness of the nozzle.
Nozzle(i):FlangeWidth
Type the flange width for the nozzle.
Nozzle(i):FlowDirection
Type the flow direction for the nozzle.
Nozzle(i):PortDepth
Type the depth of the port for the nozzle.
Nozzle(i):CptOffset
Type the offset value for the component.