RoundTee Sheet - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D HVAC Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

The RoundTee sheet in the HVAC.xls workbook defines the round tees that you want in the Catalog.

PartNumber

Type the part number for the round tee. An example is TA-100X80.

PartDescription

Type a description for the round tee.

FaceWidth

Type the face width of the damper for the round tee.

FaceDepth

Type the face depth of the damper for the round tee.

ComponentType

Type the component type for the round tee.

SymbolDefinition

Type the symbol definition for the round tee.

Width

Type the width of the duct.

BWidth

Type the width of the bend.

HLength

Type the length for the round tee.

BLength

Type the length of the bend.

For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CrossSection

Type the related CrossSection object for the port in the particular nozzle.

Nozzle(i):EndPrep

Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle.

Nozzle(i):FlangeWidth

Type the flange width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.