Place a chute shape - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)
  1. Click Place Chute Shapes on the vertical toolbar.

    The Place Chute Shapes ribbon displays with the Place Chute Shape and Select belt profiles command selected.

  2. Select the belt profiles in the model.

    The belt profiles highlight.

  3. Click Sketch 2D for elevation layout .

    In the Workspace Explorer, L 0.000m, the origin plane on the Y-axis of the Belt Elevation system is selected.

    Use Add Intersecting Item and Add Projection Item as needed to add items to the sketch.

  4. Click Sketch 2D .

    The Sketch 2D environment displays.

    Fit the view so that all the selected items display.

  5. Add the MHPlace2DShapes.ocx custom command to the toolbar if it does not already display.

    Add custom commands to the Sketch 2D toolbar

  6. Click Place 2D chute shapes .

    The Place 2D chute shapes dialog box displays.

  7. Select a 2D shape from the Select 2D Symbol list, and then place on the belt profile as needed. Continue to place shapes as needed.

  8. Set the remaining parameters, and then click Close. For more information, see Place 2D Chute Shapes Dialog Box.

  9. Click Finish.

    The software returns to the 3D environment.

  10. On the Place Chute Shapes ribbon bar, click Sketch 2D for side elevation layout .

    In the Workspace Explorer, L 0.000m, the origin plane on the Y-axis of the Side Belt Elevation system is selected.

  11. Click Sketch 2D .

    The Sketch 2D environment displays.

  12. Repeat steps 6 and 7.

  13. Click Close.

  14. Select the parent system for the chute shape from the Select Parent list.

    If necessary, click More to display the Select System dialog box, and then select the system.

  15. Set the Placement mode to Add,Modify.

  16. Click Finish.

    The software adds the chute shapes to the model.