There was no contact between the edge reinforcement and the reinforced edge port - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: There was no contact between the edge reinforcement and the reinforced edge port. For example, the edge reinforcement and/or the reinforced edge port might need to be updated.

Recovery:

  1. Verify that the edge reinforcement and the reinforced system are correct. Make any necessary corrections.

  2. Verify that the edge port is correct.

  3. Update the edge reinforcement and the reinforced system if they are on the To Do List.

  4. If the problem persists, report steps taken to your support group.