Failed to generate the profile part. The profile part cannot be split with the planning seam. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Object Type in the To Do List: Planning seam

Meaning: The profile part cannot be split with the planning seam.

Recovery:

  1. Verify that the planning seam is not on the To Do List and has no other issues.

  2. Recompute the object.

  3. If the problem persists, report steps taken to your support group.