The Maximum or Minimum Temperature value of the part prohibits placement on the pipe run. Verify that a valid temperature value has... - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The part could not be placed because the service limits for the part are out of range when compared to the service limits defined on the pipe run.

Recovery: Place a different part. Change the service limit data on the pipe run. Change the service limit values on the part.