Error in creating/modifying beam system geometry - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Object Type in the To Do List: Beam system.

Meaning: The geometry of the beam system is not proper or is missing inputs.

Recovery:

  1. Check the inputs and the boundaries of the beam.

  2. Recompute the object.

  3. If the problem persists, report steps taken to your support group.