Axis-end frame connection is related to an end port that is different from the supporting member end port. Change connection to unsupported and then re-select the supporting member. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The input end port of the supporting member does not match the related end port of the axis-end connection, resulting in inconsistent relationships. This is an internal software failure where the axis-end connection was defined incorrectly.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the member.