Failed to set the wire body geometry for the reference curve. The reference curve will not display properly. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: Failed to set the wire body geometry for the reference curve. The reference curve will not display properly nor can it be used for another process, such as bounding another object. Failure could have occurred at any stage of this process.

Recovery:

  1. Update any inputs that are on the To Do List.

  2. If the problem persists, report steps taken to your support group.