There was no contact between the profile and member - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: No contact was found between the profile and the member. One or both might need to be updated, or they do not touch.

Recovery:

  1. Verify that the profile and the member make contact. Make any necessary corrections.

  2. Update the profile and member if they are on the To Do List.

  3. If the problem persists, report steps taken to your support group.