Brace end is not located near the second supporting member in the vertical corner brace frame connection. Change the connection to unsupported and then re-select the supporting members. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The X, Y, Z brace end coordinates are not located near the second supporting member. This is an internal software failure where the software allowed an improperly connected vertical corner brace.

Recovery:

  1. Open the Structure task.

  2. Click Select .

  3. Set the Locate Filter to Frame Connections.

  4. Select the frame connection in error.

  5. Select By Rule from the Connection box on the ribbon.

  6. Redefine the end location of the brace by selecting the frame connection of the supporting beam.