The Allowable minimum bend radius of cable is greater than bend radii of bends in path. - Intergraph Smart 3D - Administration

Intergraph Smart 3D Troubleshooting Reference

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_S3D
12.1(2019)

Meaning: The cable is routed through a path with bends that are too sharp for the cable. Using the current path will cause damage to the cable.

Recovery: You can either re-route the cable through a different path where the bends are larger, or you can use the current path but use a different cable that can handle the tighter bends.