Add a load to a load combination - Intergraph Smart 3D - Help

Intergraph Smart 3D Compartmentation

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)
  1. Click Select on the vertical toolbar.

  2. Select Load Combination in the Locate Filter box.

  3. Select the Analysis tab in the Workspace Explorer.

    To display the Analysis tab, click Tools > Options, and select the Analysis check box.

  4. Select a load combination on the Analysis tab.

  5. On the ribbon, click Spatial Load to add a spatial load.

  6. On the ribbon, click Point Load to add a point load.

  7. Click Finish.

  • You can also use the Load List Control on the ribbon to add and remove loads. See Add loads using Load List Control.

  • A point load does not appear under a load combination in the Workspace Explorer even if it has been added to that load combination. The point load appears under its load folder.