Place Volume by Four Points Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Compartmentation

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

Sets options for placing a volume defined by three planar points and an elevation point.

Volume Properties

Displays the Properties dialog box, which allows you to set properties for the compartment, ship zone, or void space that you are placing. For more information, see Compartment Properties Dialog Box, Ship Zone Properties Dialog Box, or Void Space Properties Dialog Box.

Volume Point 1

Defines the first point for the definition of the volume.

Volume Point 2

Defines the second point for the definition of the volume. This point determines the length of the volume in one direction.

Volume Point 3

Defines the third point for the volume. This point determines the width of the volume and defines the horizontal plane of one face.

Volume Point 4

Defines the elevation, or depth, of the new volume.

Handles

Allows you to drag the sides of the volume to resize it. This option only displays when you modify a volume.

Select Volumes for Addition

Allows you to select additional volumes (graphically or from the Workspace Explorer) to add to the current volume definition. First, select a volume in a graphic view or from the Workspace Explorer, and then click Add to add the volume to the list.

Select Volumes for Subtraction

Allows you to select volumes (graphically or from the Workspace Explorer) and then remove the selected volume from the volume definition.

Volume List

Displays the Boolean Operation List Dialog Box, which lists the volumes added to or subtracted from the overall volume. You can add or remove volumes using the buttons on this dialog box.

Finish

Places the volume as specified. This option only appears when you modify a volume.

Name

Displays the default name for the volume (as dictated by the active name rule), and allows you to type a different name, if needed.

Type

Specifies the type of volume. Selecting More opens the Select Volume Dialog Box from which you can select a type.

Space folder

Allows you to assign the new volume to a folder in the space hierarchy. For information about creating space folders, see Create a space folder.