Query Service Dialog Box - Intergraph Smart 3D - Help

Intergraph Smart 3D Compartmentation

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

Displays the results of the query you ran. This dialog box appears when you click Tools > Query Service.

Query Types

Specifies what is being queried. The following types of queries are available:

Volumes

Volumes on a deck - Reports volumes that are on the input deck plate.

Volumes cross a deck - Reports volumes that cross the input deck plate.

Volumes on or cross a deck - Reports volumes that either cross or are on the input deck plate.

Volumes on a plane - Reports volumes that are on the input plane.

Volumes crossing a plane - Reports volumes that cross the input plane.

Volumes on or crossing a plane - Reports volumes that either cross or are on the input plane.

Volumes by Part - Reports volumes by the input volume part name.

Volumes by PartClass - Reports volumes by the input volume part class.

Volume based on point in model - Reports volumes on the given input point.

Volumes connected (get adjacent Volumes) - Reports volumes that are adjacent to the input volume.

Volumes connected on the same deck or plane - Reports volumes that are connected on the input deck plate or plane.

Objects

Objects that are completely within a Volume - Reports objects that are completely inside the input volume.

Objects that cross a Volume - Reports objects that cross the input volume.

Objects that are Inside and Touching a Volume - Reports objects that are completely inside and touching the input volume.

Objects that are Outside and Touching a Volume - Reports objects that are completely outside and touching the input volume.

Objects that are Outside a Volume - Reports objects that are outside the input volume.

Objects Encompass and Touching a Volume - Reports objects that are encompassed within and touching the input volume.

Objects Encompass and within a Volume - Reports objects that are encompassed within the input volume.

Objects whose center point is within a Volume - Reports objects whose center point is within the input volume.

Geometry

Specify Volume topological boundaries (get bounded plates) - Reports topological boundaries (bounded plates) for the input volume.

Get the Volume Geometry - Retrieves the geometry of the input volume. This data can be exported to a .sat file or an .iges file.

Compute the enclosed volume - Computes and displays the enclosed volume of the input volume.

Compute the enclosed volume's centroid below a given height (fill-height is an example) - Computes and displays the centroid of the input volume.

Compute the overlap geometry between two adjacent Volumes - Retrieves the overlap geometry of two adjacent input volumes. This data can be exported to a .sat file or an .iges file.

Compute the overlap geometry Area between two adjacent Volumes - Computes and displays the intersection type and intersection geometry of two adjacent input volumes.

Get the range of a Volume (along global CS) - Computes and displays range points of the input volume along the global coordinate system.

Get the minimum range of a Volume (optimal calculation) - Computes and displays the minimum range points of the input volume.

Get the minimum range of a Volume along Active CS - Computes and displays the minimum range points of the input volume along the global coordinate system.

Get the surfaces of the Volume geometry - Retrieves the geometry surfaces of the input volume. This data can be exported to a .sat file or an .iges file.

Get Overlapping geometry for Volumes on a deck or plane - Retrieves the overlapping geometry between the input deck plate and the volumes on that plate. This data can be exported to a .sat file or an .iges file.

Get Subtracted geometry for two objects - Retrieves the subtracted geometry of the two input volumes. This data can be exported to a .sat file or an .iges file.

Retrieve an attribute on the selected Volume - Reports the attribute of the input volume.

Get Intersection Geometry of Volume and specific type Objects Overlapping Volume - Retrieves the intersection geometry for the input volume and the filter. This data can be exported to a .sat file or an .iges file.

Custom Query

Computes and reports the objects, such as volumes or parts, according to the input.

Filter

Specifies a filter to control the results of the query. Click More to display the Select Filter dialog box.

S. No

Displays sequential numbers corresponding to the returned objects.

Results

Displays the object names.

Type

Displays the object type.