Query a dimension - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

Language
English
Product
Intergraph Smart Isometrics
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

You can use Dimension Pipeline Dimension Pipe to query a dimension between two keypoints on the same straight or a dimension over several components or objects.

Use the dimension markers in exactly the same way as when you are dimensioning the pipe route. The Properties window reports the distance between two markers as you move them throughout the model using the keyboard.

The Properties window displays pertinent information related to the selected dimension scope, including the Start and End points of the dimension (center of the elbow to the center of the tee), the Length of the overall dimension (186 mm), and the lengths of the individual Legs that make up the span of the selected dimension.

When you press the X key, the software moves the active marker to the next keypoint, and the information in the Properties window updates accordingly.

You can continue to press the X key to walk the active marker along the pipe route, or you can query a dimension in another part of the model by defining a different start and end point.