Improvements - Intergraph Smart WQMS - 2019 R1 (5.0) - Release Bulletin - Hexagon PPM

Intergraph Smart Weld Quality Management System Release Bulletin (2019 R1)

PPMProduct
Intergraph Smart WQMS
PPMCategory_custom
Release Bulletin
Version_SmartWQMS
2019 R1 (5.0)

Smart Weld Quality Management System 2019 R1

  • You can now generate a weld card with QR code by selecting one or more than one weld. The QR code stores the details such as weld number, weld label, and drawing number. (CR-CP-334403).

  • You can now attach, un-attach, and download files for qualified welders using the icons in the Welders Log module. For more information, see Create or update Welders and Welder Qualifications. (CR-CP-338440).

  • Few conditions are added to generate Line History Report and blank Line History Report such as 'atleast one weld in a drawing must complete the Non Destructive Test process'. For more information, refer to Generate Line History Sheet report. (CR-CP-340594).

  • You can now generate a Line History Report for multiple ISOs/line numbers for the selected drawings using Bulk Line History Report. For more information, see Generate Bulk Line History Sheet report. (CR-CP-348721).

  • A new NDT test module Time of Flight Diffraction (TOFD) has been implemented for Non-Destructive Tests (Before Stress Release) and Non-Destructive Test (After Stress Release) modules. User has an option to select if TOFD is required in Visual Inspection > Manage Inspection Items section. (CR-CP-348402).

  • Two new lead modules, Fitup LeadModule and Construction LeadModule are implemented to manage Fit Up and Construction data individually.These modules are applicable for both Piping Installation and Structural Installation discipline. For more information, refer to Edit data in Fit Up Lead Module and Edit data in Construction Lead Module. (CR-CP-340526).

  • A new button Load Drawing has been introduced that allows a user to load only L files (drawing files) while loading piping welds and structural welds. This feature is applicable for Piping Installation module. For more information, see Load Piping Welds. (CR-CP-340595).

  • While loading piping welds and structural welds, a new button Load Data has been introduced that allows a user to load both L files (drawing files) and F file (Weld information files) from a single excel file. This feature is applicable for Piping Installation and Structural installation modules. For more information, see Load Piping Welds and Load Structural Welds. (CR-CP-340513).

  • You can now attach multiples files for the weld in the folder structure using Attach files from Folder to Welds in ISO button in the relevant modules views. To use this option, user must first create a folder path as Project name > Drawing number > weld number/joint number in the desired location. For more information, refer to Module Icons. (CR-CP-348720).

  • You can now assign new welders and edit the existing welders in both Lead and Construction Lead modules. This feature is applicable for Piping Installation and Structural installation modules. (CR-CP-349838). For more information, refer to in Lead Module, Construction Lead Module in Piping Installation module.

  • For Structural installation module, there should be three modules (Fit Up, Welding and NDT) where the user can update the inspection dates in each of the module and the welds can be inspected by dates and report number instead of NOI/ROI process. (CR-CP-340524). For more information, see Fit Up module, Welding module, and NDT module.

  • You can now generate a weld card for the weld data using Generate Weld Card button. This feature is implemented for Piping and Structural Installation module. User can select more than 1 weld and generate weld card.(CR-CP-345524). For more information, refer to Generate Weld Card section in Load Piping Welds.

  • A new button Download Files has been implemented that allows a user to download the files for an object in a structured format, Project\Drawing number\Weld or Joint number folder. This feature is applicable for Piping, Structural, and all installation modules. (CR-CP-340528).

  • You can now attach, un-attach, and download files to NOI/ROI, welds, and welder objects using respective buttons. This feature is applicable for Piping, Structural welds, and all installation modules. (CR-CP-340521).

  • A new feature has been implemented where the first two welds performed by a welder are set as production welds for a project, specific to a discipline. By default, these production welds will be sent to RTE inspection. (CR-CP-339530), (CR-CP-340515).

  • You can now generate a report with two columns that contains welder ID and its QR code so that it can be printed on a sticker. (CR-CP-339871).

  • While updating data in Fit Up, Welding, NDT modules using Excel files, a Excel log file is generated with loading status against each weld. The software provides an option to open the log file while loading Excel files.(CR-CP-338081).

  • A new feature PWHT Requirements (Post Welding Heat Treatment) has been implemented where the user can assign PWHT requirements for a piping class. For more information, refer to Assign Post Weld Heat Treatment requirements for a piping class. (CR-CP-338426).

  • You can now generate Bulk Line History Sheet report with multiple ISOs/Line Numbers. This feature is applicable only for Piping Installation. (CR-CP-348721).

  • You can now upgrade and install Weld Quality Management System upon SPF 10 (2019). (CR-CP-347536).

  • In Line History Sheet report, QR code is now displayed only on the first page. (CR-CP-338082).

  • You can now generate a weld card with a list of welders who are qualified to do the welds. This feature is applicable only for Piping Welds module. (CR-CP-339880).

  • A new button Update NDE Percent On Weld is provided in Piping Welds to update the NDE Percentages on a weld that are defined in NDE Matrix. (CR-CP-339894)

  • A new module NDE Matrix is added in which you can define the percentage of welds that are required to undergo various NDTs for a particular material and weld type combination. (CR-CP-339892).

  • You can now view the number of records displayed in a module view. (CR-CP-339869).

  • You can now assign tracer welds for the welds that are rejected. (CR-CP-340517).

  • You can now select the NDT for which the weld is rejected in the Select NDT list for Piping Installation NDT modules. (CR-CP-340533).

  • A new module NDE Definition is implemented in which you can select the conditions such as All WPS and All Welder’s work. (CR-CP-339896).

  • You can now select the welds for Non Destructive Examination (NDE) based on NDE Percentages and the conditions (All WPS and All Welder’s work) selected in NDE Definition. (CR-CP-339896).

  • A new NDT module, Piping NDT is implemented in Fabrication Piping module to be able to capture NDT dates and report numbers. For more information, refer to Create NDT for a weld . (CR-CP-339878).

  • You can now configure tracer weld assignment for Piping Installation and Structural Installation using the administration excel files. (CR-CP-340517), (CR-CP- 340516).

  • You can now search for ISO/Drawing numbers data by copy pasting multiple values separated with a | (pipe) symbol from an excel file or notepad file.(CR-CP-348656).

  • You can now generate welder badge with QR code for qualified welders to read the welder ID. (CR-CP-345525)

  • You can now generate Project Status report for fabrication modules to view the count of welds completed at each inspection stage. (CR-CP-342979).

  • You can now generate Welder Performance Summary report by selecting a date range in Reports module. This report includes number of joints done by welder, number of joints accepted and rejected, and so forth. (CR-CP-340536). For more information, see Generate Welder Performance Summary Report.

  • Admin user can now generate Tracer Welds Summary report in Reports module to view the rejected welds of a welder and its tracer welds with their status. (CR-CP-340535). For more information, see Generate Tracer Welds Summary Report

  • You can now generate Piping Material Traceability Summary report in Reports module to track the piping components used during fabrication. (CR-CP-340534). For more information, see Generate Piping Material Traceability Summary report

  • You can now assign WPS to a weld in Piping Welds module based on WPS assignment conditions that are configurable in the WQMS-Admin configuration file. (CR-CP-338438).

  • A new module Line Progress is introduced to generate Line Progress report that displays the progress of lines in a project for both workshop welds and field welds. (CR-CP-339870).

  • You can now attach, unattach, and download the files attached to welds in NDT module. Also, you can attach a single file to all the welds. (CR-CP-338443).

  • You can now assign welders to the welds in Fabrication - Piping Welds module and Piping Visual Inspection module based on welder qualifications and qualification date. (CR-CP- 338441).