Add objects to the SmartSketch list - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Click Tools > Add to SmartSketch List .

  2. Click SmartSketch Properties on the ribbon to change any of the relationship indicator selections.

  3. Click Clears the List to remove all objects from the locate list.

  4. Click Locate on List Only to specify that the software locates objects on the list from the bottom of the list up.

  5. Select a number in the List size box to change the maximum number of objects on the locate list.

  6. Type a number in the Dwell time box to specify the time in seconds that you pause over an object to add it to the locate list.

  7. Click Select to choose objects in the graphic view you want to add to the locate list.

  8. Click Finish to complete the selection and close the command.

  • Many of the Add to SmartSketch List controls also are available on the SmartSketch tab of the Options dialog box.

  • Press CTRL+D to add the selected object to the SmartSketch List.

  • Press CTRL+L to lock the constraint in SmartSketch.