End Type Tables Properties - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)

The properties for each component within the End Type Tables are all the same. They are as follows:

End Type Properties

Name

Specifies the name of the end type. You can only edit the Name of a custom end type. You cannot change the name of any out-of-the-box end type delivered with CADWorx Plant.

Base End Type

Specifies the base end type for the custom end type. You cannot edit this property.

Force Match End Type Table

Forces the custom end type to only allow connections that you define in the Matching End Type Table. You can set this option to True or False.

Stub End Type

Specifies if the end type is a stub end type. You can set this option to True or False.

Disable Weld Selection

Specifies whether automatic weld insertion for the end type is enabled. You can set this option to True or False.

Disable Bolt Selection

Specifies whether automatic bolt insertion for the end type is enabled. You can set this option to True or False.

Disable Gasket Selection

Specifies whether automatic gasket insertion for the end type is enabled. You can set this option to True or False.

Force End Type Length within Component

Forces the end type length to be included in the overall length of the component. You can set this option to True or False.

Isogen Symbol

Specifies the Isogen symbol that you associated with the end type. You can change the Isogen symbol as needed. This value designates the symbol that the isometric drawing displays for the end type when you run ISOGENOUT.

Version

Specifies the version of the CADWorx Spec Editor. You cannot edit this property.

Created By

Specifies the person who created the data. You can edit this property.

Edited By

Specifies the person who edited the data. You can edit this property.

Description

Specifies the description of the end type.

End Type Table Properties

Table Name

Specifies the name of the table selected.

End Type

Specifies the end type for that particular component. You cannot edit this property.

Size Table

Specifies the size table associated with the End Type Table. This is set up when you create the end type.

Part Number

Specifies the part number associated with that particular component end type.

Version

Specifies the version of the CADWorx Spec Editor. You cannot edit this property.

Created By

Specifies the person who created the data. You can edit this property.

Edited By

Specifies the person who edited the data. You can edit this property.

Description

Specifies the description of the table. This can be edited.

Default Settings

Isogen Symbol

Specifies the Isogen symbol associated with the selected end type. This is the end type symbol that displays when you run Isogen Out.

Component Class

Specifies the class type specification for the component.

Temperature Rating

Specifies the maximum allowable temperature for the component.

Pressure Rating

Specifies the maximum allowable pressure for the component.

Applicable Gaskets

Specifies the applicable gasket for the component based on the selection code. The value that you choose in the Applicable Gaskets list determines the gasket that inserts when you place a component pair that requires a gasket, such as flanged components, clamped components, flanged end-types, and clamped end types. You can either type the code in the Applicable Gaskets box, or select an available code from the list. The Applicable Gaskets option only displays when the component allows a gasket. To assign selection codes, see Selection Codes Tutorial, and Assign selection codes to components without catalog defaults.

Applicable Bolts

Specifies the applicable bolt for the component based on the selection code. The value that you choose in the Applicable Bolts list determines the bolt that inserts when you place a component pair that requires a bolt, such as flanged components, clamped components, flanged end-types, and clamped end types. You can either type the code in the Applicable Bolts box, or select an available code from the list. The Applicable Bolts option only displays when the component allows a bolt. To assign selection codes, see Selection Codes Tutorial, and Assign selection codes to components without catalog defaults.

Fields

MAINSIZE - Main size

Specifies the main sizes used for that end type.

OAL - Overall length

Specifies the overall length used for that end type.

FACELEN - face length

Specifies the face length of that end type.

CFD - connection face diameter

Specifies the connection face diameter for that end type.

FFD - face face diameter

Specifies the face face diameter for that end type.

CHD - connection hub diameter

Specifies the connection hub diameter for that end type.

FHD - face hub diameter

Specifies the face hub diameter for that end type.

PENGLEN - pipe engagement length

Specifies the pipe engagement length for that end type.

CPENGD - connection pipe engagement diameter

Specifies the connection pipe engagement diameter for that end type.

FPENGD - face pipe engagement diameter

Specifies the face pipe engagement diameter for that end type.

Custom Data

Enables you to input fields using the New Field Dialog Box. You can access the custom data fields in CADWorx Plant through the Component Edit dialog box. For more information, see Component Custom Data Dialog Box and Local Edit in the CADWorx Plant Users Guide.

Picture Description

Displays an image of the component.

Listed below are the types of components available for selection in the table. Images are provided when available.

For custom pipe supports, user shapes, and custom topworks, the Picture Description displays Image Path. The software allows you to browse for a .png or .gif drawing, and then displays the drawing below the Image Path under Picture Description.

Examples of Component End Types

Buttweld

Ferrule Engagement and Ferrule Hub

1. OAL

2. FFD

3. PID

4. CFD

1. OAL

2. CPENGD = FPENGD

3. PENGLEN

4. PID

5. FHD

Flanged

H, I, Q, and Tri-Clamp Engagements

1. FFD

2. FACELEN

3. PID

4. CFD

1. CFD

2. FACELEN

3. PID

4. FFD

Socket Engagement

Specific Engagement

1. PID

2. OAL

3. FHD

1. OAL

2. PID

Threaded and Socket Weld

Threaded Engagement

1. OAL

2. FHD

3. CPENGD = FPENGD

4. PENGLEN

5. PID

1. PENGLEN

2. OAL

3. PID