Assign gaskets and bolts to flange weld neck in the catalog - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)
  1. Expand Flanges, and then expand Flange Weld Neck.

    You can also create a new flange data table, and then assign the Applicable Bolts and Applicable Gaskets value while creating that flanged data table. You must have a value in the Selection Code of the gasket and bolt data tables before you can select a value for the Applicable Gaskets or Applicable Bolts list. If you need to create a new data table, see Add a new data table to a category, or Add a new data table to a group folder.

  2. Click FLG_WN_150.

  3. In Properties, select GAS_150 from the Applicable Gaskets list.

  4. In Properties, select BLT_150 from the Applicable Bolts list.

  5. Click FLG_WN_150A.

  6. In Properties, select GAS_150A from the Applicable Gaskets list.

  7. In Properties, select BLT_150A from the Applicable Bolts list.

  8. Click FLG_WN_150B.

  9. In Properties, select GAS_150B from the Applicable Gaskets list.

  10. In Properties, select BLT_150B from the Applicable Bolts list.

  11. Click File > Save.

Next, Set selection codes on gasket and bolt components in the project.