Add a new support assembly - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)
  1. Right-click the pipe support under the project or libraries file in the Pipe Support Library pane.

  2. Click Add Pipe Support Assembly.

    The New assembly pane displays.

  3. Type a Group Name.

  4. Type an Assembly Name or use the default.

  5. Select the Size Range list, and then select or clear sizes from the list. You can click the Component Size Setup ellipsis to change the Size\Member sizes for each Pipe Size.

  6. Select the Insulation Options as needed by selecting their respective check boxes.

  7. Select a component from the Components Available list. You can repeat this as needed to build an assembly of components.

  8. Use the Add or Remove arrows to move the component parts needed to the Components Selected box. Alternatively, you can drag the component parts needed to the Components Selected box.

    Use the Move Up or Move Down arrows to rearrange the order of the parts as they display in the drawing in the Components Selected box.

  9. Select a CAESAR II Type.

  10. Type the Sort for the bill of materials.

  11. Select the Type for the bill of materials.

  12. Type an Identifier.

  13. Select the SKEY for the support for isometric generation.

  14. Type a message text to appear for the pipe support.

  15. Select a Message Type.

  16. Select a Detail Sketch, by selecting the ellipsis.

  17. Type the long description in the Long box, or click to set up a format.

  18. Type the short description in the Short box, or click to set up a format.

  19. Type the tag in the Tag box, or click to set up a format.

  20. Type the part number in the Part Number box, or click to set up a format.

  21. Type the notes in the Notes box.

  22. Click Add.

See Also