Copy and paste shrinkage - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Manufacturing

Intergraph Smart 3D
10.1 (2014 R1)
  1. Click Select on the vertical toolbar.

  2. Select the shrinkage to copy.

    • You can select the shrinkage in the model, or from the Workspace Explorer.

    • You can set the Locate Filter to Shrinkage to make the selection easier.

  3. Click Edit > Copy.

  4. Click Edit > Paste.

  5. Select the part on which to paste the shrinkage.

    • You must select a destination that does not already have shrinkage.

    • If the shrinkage that you copied is from a plate, you must select a plate for the destination. If the shrinkage that you copied is from a profile, you must select a profile for the destination.

  6. Select the primary direction for the shrinkage.

  7. Optionally, select a secondary direction for the shrinkage.

  8. Click OK on the Paste dialog box.