Diagonal Lengths and Mounting Angle Dialog Box - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Manufacturing

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Displays the controls used to generate reports on distances and mounting angles.

Select Seam

Select a seam from the list of outer boundaries of the pin jig. This option is only available if a pin jig is selected.

Distance

Specify a distance to identify which stiffeners are bounded to the selected seam. This option is only available if a pin jig is selected.

Overlap Factor

Specifies the minimum overlap factor for the stiffeners on the pin jig remarking surface.

Angle Report Type

Specifies the method for reporting mounting angles. The available options are:

  • Based on Surface - Report mounting angle with respect to the stiffening-surface normal or the base-plane normal.

  • Based on Tangent - Report mounting angle by constructing tangents at the circle intersection points with the stiffening or remarking surface.

Convex Radius

Specifies the radius used for mounting angle computation when the curvature of the surface is convex. This option is available only if the Angle Report Type is set to Based on Tangent.

Concave Radius

Specifies the radius used for mounting angle computation when the curvature of the surface is concave. This option is available only if the Angle Report Type is set to Based on Tangent.

Select First Stiffener

Select the first stiffener from the list of stiffeners.

Select Second Stiffener

Select the second stiffener from the list of stiffeners.

First Stiffener

Points to Process

Select either Length Points or Vertex Points from the list. Length points are points defined by the symbol file. The symbol file is then used to prepare the end cut. Vertex points are points defined by the base or offset edge of the stiffener.

Stiffener Side

Select the point from which to measure. If the Points to Process option is set to Vertex Points, then the available options include Base - Web Left, Base - Web Right, Base - All, Offset Web Left, Offset - Web Right, and Offset - All. If the Points to Process option is set to Length Points, then the options include Base - Web Cuts, Base - Flange Cuts, Base - All, Offset - Web Cuts, Offset - Flange Cuts, and Offset - All.

Points

Select the point on the first stiffener from which to measure. The point names represent the closest two edges of the stiffener. For example, WL_B_Point indicates the point on the left side of the web and bottom of the stiffener. The point highlights in the model.

SecondStiffener

Points to Process

Select either Length Points or Vertex Points from the list. Length points are points defined by the symbol file. The symbol file is then used to prepare the end cut. Vertex points are points defined by the base or offset edge of the stiffener.

Stiffener Side

Select the point from which to measure. If the Points to Process option is set to Vertex Points, then the available options include Base - Web Left, Base - Web Right, Base - All, Offset Web Left, Offset - Web Right, and Offset - All. If the Points to Process option is set to Length Points, then the options include Base - Web Cuts, Base - Flange Cuts, Base - All, Offset - Web Cuts, Offset - Flange Cuts, and Offset - All.

Points

Select the point on the second stiffener from which to measure. The point names represent the closest two edges of the stiffener. For example, WL_B_Point indicates the point on the left side of the web and bottom of the stiffener. The point highlights in the model.

Parameter - Value table

Displays the distances and mounting angles based on the points that you have selected.

View/Report Options

Select the type of report to generate. Available options include Web left-Web left, Web right-Web right, and Inner face-Inner face.

Fit View

Fits the view to the selected objects.

Generate Report

Creates a report on distances and mounting angles. Additionally, you can view the generated report.