Move segments of a path - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Select .

  2. Select Structure in the Locate Filter.

  3. Select the handrail or slab for which you want to modify the path.

  4. For handrails, click Path on the ribbon.
    -OR-
    For slabs, click Define Boundaries and then click Sketch 3D .

  5. Select the segments to move.

  6. If you want the length of a straight segment to remain constant while you move the segment click Length Locked .

    • When the segment length is locked, the software automatically modifies the turn points, along with the length and angle of adjacent segments, to remain connected to the moved segment. The length of the moved segment does not change.

    • When the segment length is not locked, the software extends or shortens the associated segments to connect with the new position of the moved segment. The length of the moved segment can change.

  7. Click to specify the starting location of the move vector.

  8. Click to specify the ending location of the move vector.

  9. Click Finish.

  • The new path displays in dynamics when you click Finish.

  • The new handrail or slab is actually created when you click Accept and then Finish on the ribbon.