Modify wall length using 2-D sketch - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to modify.

  4. Click Select a Path on the ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model that you want to see when modifying the wall length in the 2- D environment.

  7. Click Draw .

  8. Click Bottom Up on the ribbon.

  9. Select the wall segment to modify.

  10. In the Length box, key in the new length for the segment, or grab the box at the end of the segment and move it to the new location.

  11. In the 2-D environment, click Close .

  12. Click Finish.

  13. Optionally, edit the wall system, type, composition, and other properties.

  14. Optionally, click Select Boundaries to limit the height of the wall.

  15. Click Finish.