Position framing members using number and spacing method - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)
  1. Click Place Framing Members Command on the vertical toolbar.

  2. In the Placement box, select Number and Spacing.

  3. In the Count box, type the number of framing members to place.

  4. In the Maximum Spacing box, type the distance between the framing members.

  5. In the Type category box, select the member type category for the framing member being placed.

  6. In the Type box, select the member type for the framing member being placed.

  7. Set the Section Name, Cardinal Point, and Offset options as required.

  8. Select the first supporting member. If you are going to define a starting location for the framing members, select the first supporting member near the end from which you want to define the framing member's starting location.

  9. Select the second supporting member.

  10. Optionally, select the starting location of the first framing member along the first supporting member.

  11. Click Finish.