Definition Tab (Insulation Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

The Definition tab displays the insulation properties as they are defined in the reference data. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid. If you selected more than one insulation and then selected the properties command, only the common properties between the selected insulation display.

The properties that display depend on what you defined in the reference data. Refer to the Structure Reference Data Guide for more information on the properties.

Name

Defines the encasement item name. The delivered encasement items use the naming convention of Member Type_Encasement Type_Cross Section_Material. We recommend that you use a similar naming convention or adopt the delivered naming convention.

Cross Section Type

Defines the cross section type to which the encasement option applies. The available cross section types depend on the section libraries that you have included in your Catalog. Examples of valid cross section types include: 2L, L, HSSC, W, and so forth. Use an asterisk (*) to indicate that the encasement item is applicable to all cross section types.

Definition

Defines the ProgID of the encasement rule. The delivered definition is SPSMemberEncasements.MemberEncaseDef.

Encasement Type

Specifies the encasement type. You can add encasement types by editing the Member Fireproofing Application Type select list in the Catalog task.

1 Contour Fully Encased
2 Contour Flange Exposed
3 Block Fully Encased
4 Block Flange Exposed
5 Block with Voids
6 Block with Voids Flange Exposed
7 through 988 are reserved by Intergraph for future use
999 is Custom

Fireproofing Label

Defines the fireproofing label to use on drawings.

Member Type Category

Defines the member type to which the encasement item applies. Member types are defined in the Structural Member Type select list in the Catalog task.

Setback Distance 1

Defines the distance between the Setback Reference 1 location and the insulation/fireproofing.

Setback Distance 2

Defines the distance between the Setback Reference 2 location and the insulation/fireproofing.

Setback Reference 1

Defines the location along the member from which to measure the insulation/fireproofing setback.

  • Part Start - The start of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.

  • Part End - The end of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.

  • Axis Start - The start of the member part's axis, which will remain unaffected by member part features.

  • Axis End - The end of the member part's axis, which will remain unaffected by member part features.

Setback Reference 2

Defines the location along the member from which to measure the insulation/fireproofing setback.

Symbol Definition

Defines the ProgID of the insulation symbol.

See Also

Insulation Properties Dialog Box